Product ID:THERMOFIT S-1125 ADHESIVE, PARTS A & B
MSDS Date:09/01/1990
FSC:8040
NIIN:01-147-9957
Kit Part:Y
MSDS Number: BLLDS

RAYCHEM CORP

300 CONSTITUTION DRIVE
MENLO PARK, CA 94025
US

Emergency Phone: 415-361-4907

Info Phone: 415-361-4907

Preparer: ARLENE KLONOFF

Cage: 06090

RAYCHEM CORP

MENLO PARK, CA 94025-1164 US

Telephone: 415-361-4907

Cage: 06090

POLYAMIDE AMINE (PART A)

ALUMINUM SILICATE PIGMENT (PART A)

EPICHLOROHYDRIN/BISPHENOL A EPOXY RESIN (PART B)

CAS: 25068-38-6

RTECS: KD4380000

ALUMINUM SILICATE PIGMENT (PART B)

AMORPHOUS SILICA (PART B)

CAS: 112945-52-5

RTECS: VV7310000

CARBON BLACK

CAS: 1333-86-4

RTECS: FF5800000

OSHA PEL 3.5 MG/M3

ACGIH TLV: 3.5 MG/M3; 9192

LD50 LC50 Mixture:PART B-LD50(RAT)= 11.4G/KG (EPOXY RESIN)
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:PART A: IRRITATING TO EYES, SKIN,
NOSE, THROAT. SEVERE EYE IRRITANT W/POTENTIAL TO CAUSE PERMANENT
EYE DAMAGE. MAY BE IRRITATING IF INGESTED, BUT IS NOT KNOWN TO HAVE
OTHER HARMFUL EFFECTS. PART B-SKI N, EYE, NOSE, THROAT IRRITATION.
REPEATED OR PROLONGED CONTACT MAY PRODUCE SKIN SENSITIZATION OR
OTHER ALLERGIC *
Explanation of Carcinogenicity:THIS PRODUCT CONTAINS TRACE AMTS OF
RESIDUAL EPICHLOROHYDRIN WHICH IS KNOWN TO THE STATE OF CALIFORNIA
TO CAUSE CANCER.
Effects of Overexposure:*RESPONSES IN SUSCEPTIBLE INDIVIDUALS. MAY BE
IRRITATING IF INGESTED, BUT IS NOT KNOWN TO HAVE OTHER HARMFUL
EFFECTS.

First Aid:EYES: FLUSH WITH WATER FOR AT LEAST 15 MINUTES. SEEK MEDICAL
ATTENTION. SKIN: WASH WITH MILD SOAP AND WATER. INGESTION: SEEK
MEDICAL ATTENTION. INHALATION: REMOVE TO FRESH AIR. TREAT
SYMPTOMATICALLY.

Flash Point:PART A: 480F*
Lower Limits:*PART B:495F
Extinguishing Media:CARBON DIOXIDE, WATER, DRY CHEMICAL, FOAM.
Fire Fighting Procedures:TOXIC FUMES MAY BE EVOLVED IN A FIRE. FIREMEN
SHOULD WEAR SELF-CONTAINED BREATHING APPARATUS IN ENCLOSED AREAS.

Spill Release Procedures:DON APPROPRIATE PERSONAL PROTECTION BEFORE
RESPONDING. CONTAIN SPILL WITH INERT ABSORBENT. TAKE MEASURES TO
STOP SPILLAGE AT THE SOURCE. TRANSFER CONTAMINATED ABSORBENT INTO A
CONTAINER AND HANDLE AS HAZARDOUS WASTE.

Handling and Storage Precautions:CURING OF ADHESIVE (PARTS A & B)
SHOULD BE DONE IN A WELL-VENTILATED AREA. THE CURING PROCESS IS
EXOTHERMIC.
Other Precautions:PREVENT CONTACT WITH SKIN AND EYES. USE ONLY WITH
ADEQUATE VENTILATION.

Respiratory Protection:IF VENTILATION IS INADEQUATE TO CONTROL VAPORS,
NIOSH/MSHA APPROVED AIR-PURIFYING RESPIRATORS ARE RECOMMENDED.
Ventilation:IN ACCORDANCE WITH GOOD INDUSTRIAL HYGIENE PRACTICE, ENSURE
ADEQUATE VENTILATION DURING APPLICATION.
Protective Gloves:IMPERVIOUS GLOVES
Eye Protection:EYEWEAR APPROPRIATE TO GIVEN OPERATION
Work Hygienic Practices:WASH HANDS THOROUGHLY AFTER USE.
Supplemental Safety and Health

Spec Gravity:>1
Solubility in Water:> NEGLIGIBLE
Appearance and Odor:PART A: PASTE, SLIGHT ODOR, PART B: VISCOUS BLACK
PASTE, SLIGHT ODOR.

Stability Indicator/Materials to Avoid:YES
MAY REACT EXOTHERMICALLY (RELEASE HEAT) WITH ACIDS, BASES OR STRONG
OXIDIZING AGENTS.
Hazardous Decomposition Products:THERMAL DEGRADATION PRODUCTS MAY
INCLUDE, BUT NOT LIMITED TO, CO, CO2, ACIDS, ALDEHYDES & NITROGEN
COMPOUNDS.

Waste Disposal Methods:MUST BE DISPOSED OF AS HAZARDOUS WASTE IN
ACCORDANCE WITH LOCAL, STATE AND FEDERAL LAWS. DUMPING INTO SEWER,
ONTO THE GROUND OR INTO ANY BODY OF WATER IS PROHIBITED.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.